QPR NxGEN – Hot Applied Crack Sealant

/QPR NxGEN – Hot Applied Crack Sealant
QPR NxGEN – Hot Applied Crack Sealant 2017-03-10T08:35:06+00:00
Hot Applied Crack Sealant

QPR NxGEN Hot-Applied Crack Sealant is a professional grade asphalt crack sealer used to repair long linear cracks, sealing out moisture and promoting a long-lasting repair and attractive appearance.

  • Direct Fire/Oil-Jacketed Compatible
  • Premium Joint & Crack Sealant
  • Professional Grade
  • Simple, fast and economical
Safety Data Sheet – SDS (PDF)

What is QPR NxGEN Hot-Applied Crack Sealant?
QPR NxGEN Hot-Applied Crack Sealant is a flexible, rubber-like commercial grade product that is used to repair cracks of any length or width in asphalt pavements. It starts out as a solid, rubber block which is then melted in a special kettle and is heated to 400 degrees. Once melted, the crack filler is applied to the cracks. The crack filler hardens up deep inside the crack, sealing out moisture from penetrating the asphalt. This prevents it from causing further crack development and promotes a long lasting repair and an attractive appearance.

Why isn’t the QPR NxGEN Hot-Applied Crack Sealant completely hardened?
After it has been applied and allowed to cool, it is designed to remain flexible, allowing it to expand and contract with the outside air climate. It is normal for this type of material to flex to the touch. It will also temporarily retain car tire treads if parked on.

Some of the QPR NxGEN Hot-Applied Crack Sealant pulled up! What should I do?
If you park directly on top of the sealant with hot tires after a prolonged drive at highway speeds may cause the crack filler to pull up. Hot tires can re-heat the crack filler, causing it to adhere to the tire when it cools. A small portion of the hot pour crack filler is pulled up with the tire when the vehicle is later moved. It is best to not park on the crack filler when the tires are hot.