FAQs

How can I become a distributor?

2017-01-30T10:42:08-05:00

Simply contact your local QPR representative and they can give you additional information. You can find a rep in your area by visiting our Contact page.

How can I become a distributor?2017-01-30T10:42:08-05:00

What separates QPR from the rest of the products on the market?

2014-02-24T18:04:54-05:00

What separates our product from the rest is our proprietary, water-repelling additive. Our additive will allow you to repair the damaged pavement area without the need to remove any water. Simply remove any lose debris and compact the material in two inch increments. Furthermore, each batch that we produce is [...]

What separates QPR from the rest of the products on the market?2014-02-24T18:04:54-05:00

Can I get QPR high performance cold mix in bulk?

2017-01-30T10:42:08-05:00

Yes you can. Depending on the quantity you need, we can either produce some bulk material directly at your location or we can put you in contact with one of our distributors. Please go to the Contact page to contact your local QPR representative or visit our Distribution Locations page [...]

Can I get QPR high performance cold mix in bulk?2017-01-30T10:42:08-05:00

When can I apply Driveway Sealer over the area I just repaired?

2014-02-24T17:46:02-05:00

As with any asphalt-based repair material, QPR must be allowed to cure prior to the application of any sealer type product. Just as you wouldn’t apply a second coat of paint before the first coat dries, you’ll need to allow QPR to ‘dry’, as well. Curing time depends on the [...]

When can I apply Driveway Sealer over the area I just repaired?2014-02-24T17:46:02-05:00

Should I cover the patched area while it cures?

2014-02-24T17:47:25-05:00

Absolutely not. QPR is ready for traffic immediately following compaction. Covering the patch delays the curing process, and provides no benefit to your repair.

Should I cover the patched area while it cures?2014-02-24T17:47:25-05:00

How deep a hole can I fill?

2014-02-24T17:47:57-05:00

As long as you compact the QPR every two inches, you can fill as deep a hole as you like. Failure to apply proper compaction every two inches, will most likely result in the failure of your patch.

How deep a hole can I fill?2014-02-24T17:47:57-05:00

Can I use QPR to build a speed bump, curb, or ramp?

2014-02-24T17:49:56-05:00

Probably not. Remember, QPR is a REPAIR material, designed to work within the confines of a hole or utility cut. Although we have had some pretty creative customers who have found ways to use QPR in situations not approved by our Engineering Department, QPR is designed solely to patch potholes [...]

Can I use QPR to build a speed bump, curb, or ramp?2014-02-24T17:49:56-05:00

Questions regarding your patch job? We’ll be glad to help!!

2017-01-30T10:42:08-05:00

E-mail our Technical Service Department: info@qprcoldpatch.com In response to our customers requests to talk to a real person, not an automated response line, we may have to call you back. Just leave us your name and number at (800) 388-4338 and we’ll be in touch at whatever time is most [...]

Questions regarding your patch job? We’ll be glad to help!!2017-01-30T10:42:08-05:00

How do I get this stuff off my hands?

2014-02-24T17:51:27-05:00

You can’t. QPR adheres to asphalt, steel, concrete, and skin, permanently. JUST KIDDING! Pumice soaps, orange based cleaners, or other common solvents make removing the black marks from your hands easy and worry-free.

How do I get this stuff off my hands?2014-02-24T17:51:27-05:00
Go to Top